Description
Didn't find what you're looking for?
Post your buying leads to let suppliers contact you directly or
contact our customer service specialist
for help!
| Item Model | ZLQ-7(Cantilever Structure) |
| 1.Cutting Torch | One Flame cutting torch or Plasma cutting Torch |
| 2.Control system | SH-2000H Or Hypertherm EDGE |
| 3.Driving system | AC servo motor,Pansonic |
| 4.Driving method | Single Side |
| 5.Decelerators | NEUGUET from Germany |
| 7.Ignition Equipment | Automatic Ignition |
| 8.Heigth adjust | Electronic Drive adjust |
| 9.Beeline leading rail | ABBA from Taiwang |
| ⅡMain Parameter | |
| 1.Width of rail | 1000mm(other size:1200mm) |
| 2.Effective Cutting width | 1000mm(other size:1200mm) |
| 3.Length of Rail | 1500mm(other size:2000mm) |
| 4.Effective cutting length | 1500mm(other size:2000mm) |
| 5.Cutting thickness | Plasma Cutting:1~60mm Flame Cutting:6~200mm |
| 6.Max.No-loading speed | About 6000mm/min |
| 7.Cutting speed | 50-750mm/min |
| 8.Cutting accuracy | ±0.2mm (whole stroke) |
| 9.Repositioning accuracy | ±0.2mm |
| 10.Height accuracy | ±0.2mm |
| 11.Torch Adjusted Range | 200mm |
| 12.Power supply | 1~220/3~380V±10% 50Hz±1% |
| 13.Input Power | 1000W |
| 14.Oxygen gas(Flame) | 8×105Pa |
| Preheating Pressure | 3.92×105Pa |
| 15.Acetylene(Flame) | 0.49×105Pa |
| 16.Power Supply(Plasma) | Hypertherm |
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
